N-Link Hardware

N-Link Hardware Install

The N-Link is the hardware interface that connects KDMLink to your vehicle for logging. Choose the install method that matches your vehicle:

Check Compatible Vehicles before choosing an install method. Once the N-Link is installed and powered, head over to App Install & Setup to pair it with your phone.

What's in the box

• N-Link module
• CAN bus harness (for plug-and-play installs) or wire-tap harness (for wire-tap installs)
• Power harness with inline fuse
• KDMLink sticker

Before you start

Park the vehicle safely, turn it off, and confirm that your phone and vehicle are compatible. For wire-tap installs, verify the exact wire locations for your vehicle before making any connections. Required tools:

• Phillips screwdriver
• Pliers or fuse puller (for power harness fuse)
• Zip ties or double-sided tape to secure the N-Link and harnesses

Compatibility

For vehicle, phone, and install-method requirements, see Compatible Vehicles.

Troubleshooting

• No power — confirm the connector or wire-tap power connection is fully seated.
• N-Link does not appear in the app — confirm the N-Link is powered, then continue to App Install & Setup.
• Vehicle data not appearing in the app — confirm the N-Link is properly connected to the

Once the N-Link is installed and powered, continue to App Install & Setup to pair it with the KDMLink app.